ATC-1000 is a Low-cost and highly integrated Serial-to-Ethernet
Converter. Embedding a 8051CPU, 64KB OTP ROM, 32K bytes SRAM, 10/100Mbps Ethernet and
serial port support handshake RTS, CTS.
ATC-1000 can control 1 x RS232/422/485
devices located virtually anywhere (via Ethernet or Internet). It automatically
finds devices in the network Configuration over Driver Panels, serial Port,Telnet,WEB
Browser, SNMP Automatic mode switching between Driver and RAW mode Support
TCP/IP, UDP, DHCP, PPPoE, Dynamic DNS.
ATC-1000 is an industrial-strength network-based Serial
device server for connecting one RS232/422/485 device like CNC, PLC, weighting
scale, scanner and other device Directly to the 10/100Mbps Ethernet network
In addition to allowing serial devices to get networked, any host
(PC Server or Workstation) can also access remote serial device via adding
ATC-1000 devices to the existing serial port.
The device is provided of an ethernet interface on RJ45 connector
and of 1 DB9M (DTE) to connect RS232 interface and an extractable 3.81mm TB
for RS422/485 connection. The converter is also provided of a surge protection
on the RS422/485.
The power supply may be connected through a standard 9Vdc
adapter (included) (jack 2.1mm) or TB.
10Base-T or 100Base-TX (RJ45)
RS232: DB9M (DTE)
RS422/485: Extr. TB 3.81mm
from 300bps to 230.4Kbps
None, even, odd, Mark, Space
7 or 8
1, 1,5 or 2
TCP/IP, UDP/IP, ARP, DHCP, ICMP
Built in Web server,
Windows configuration Utility
CPU: 8bit 8051 25MHz
Memory: 64KB OTP ROM + 32KB SRAM
Firmware: Upgradeable by manufacturer
Windows®-based Device Installer and Windows Comm Port Redirector