These
converters allow to connect RS232 devices with others RS422/485 type. They
may be also used to extend an RS232 connection breaking the conventional 15mt
limit according to EIA RS232 (with 2 modules) up to 1200mt or more, and to
isolate them galvanically.
The converters are provided of galvanic insulation up to
3000Vdc between the two interfaces, and of surge protection on the RS422/485
interface, They are therefore suitable on long connections and/or generally,
in all the cases where difference of potential between the devices connected
to the network are possible.
The devices are provided of I/F RS232 on a DB9F connector
(DCE) and of extractable terminal blocks for the connection of RS422/485 I/F
and power supply.
To connect with DTE devices (9 pin), it's available an apposite
modem cable to be ordered separately (Code CBL058*300).
| Features |
| |
TRP-C06 |
TRP-C06H |
Power
Supply |
10-30Vdc 1.2W |
10-30Vdc 1.3W |
Data interface |
1*RS232 DCE
1*RS422/485 |
2*RS232 DCE
2*RS422/485 |
| Flow control |
automatic on RS485 |
Baud
rate |
auto, max 115Kbps |
| Status indicators |
Power
TX, RX |
| Galvanic
insulation |
3000Vdc between I/F
RS232 and RS422/485 |
| RS422/485 protection |
against surge, shorts and overvoltages |
| Connections |
Extract. TB on Power
and RS422/485, DB9M on RS232 |
| Environment |
Operating temperature: from: da -20 a +65°C |
| Rel. humidity: 10-90% non condensing |
| Dimensions
and weight |
75*151*25mm |
| 360g |
375g |
| Approvals |
EN 55022
EN 55024
EN 61000-3-2
EN 61000-3-3 |
| Warranty |
1 year |
|
RS232 to RS422/485 Converters
Price list
Forum
