The
ATC-2000WF is a RS232/RS485 to Wireless IEEE 802.11b/g converter.
It allows
to connect a RS232/422/485 device to a Wi-Fi network.
The ATC2000WF
integrates a 2.4GHz radio, processor, TCP/IP stack, real-time clock, crypto
accelerator, power management and serial interface.
The device is programmed and controlled through a simple ASCII command language.
Once it is setup it can scan to find an access point, associate, authenticate
and connect over any Wi-Fi network.
The device is provided of an internal ceramic Wi-Fi antenna,
external 2dBi antenna (included), 1 DB9M (DTE) to connect RS232 interface
and an extractable 3.81mm TB for RS422/485 connection. The converter is also
provided of a surge protection on the RS422/485.
The power supply may be connected through a standard 9Vdc
adapter (included) (jack 2.1mm) or TB.
| Features |
| Power Supply |
9-24Vdc 212mA max
Ultra-low power: 10uA in sleep mode |
| Radio |
Frequency |
2.402Ghz - 2.480GHz
|
| Protocol |
IEE 802.11b/g |
| Modulation |
DSSS (CCK-11, CCK-5.5, DQPSK-2, DBPSK-1) |
| Ch. space |
5MHz |
| Channels |
1-14 |
| Transm. rate |
1 – 11Mbps for 802.11b / 6-54Mbps for
802.11g |
| Receiver sensitivity |
-85dBm typ. |
| Output level (Class1) |
+18dBm |
| Antenna connection |
RPSMA-F |
| Antenna |
Inside ceramic chip antenna,
External 2dBi monopole antenna (included) |
| COM Ports |
1 |
| COM Interface |
RS232: DB9M (DTE)
RS422/485: Extr. TB 3.81mm |
| Hw Handshake |
CTS, RTS |
| Flow control |
RTS/CTS Hardware or none |
| Data rate |
9600, 38400, 57600 bps |
| Parity |
none |
| Data bit |
8 |
| Stop bit |
1 |
| Supported Protocols |
TCP/IP, DHCP, UDP, DNS, ARP, ICMP |
| Secure Wi-Fi authentication |
WEP-128, WPA-PSK (TKIP), WPA2-PSK, EAP-TLS for WPA1 & WPA2 Enterprise |
| Architecture |
CPU: 32bit
Real Time Clock for time stamp, auto-sleep, auto-wakeup.
Memory: 8Mb Flash, 128KB RAM, 2MB ROM, 2KB battery-backed memory
Firmware: User upgradeable Over the air (FTP) |
| Status indicators |
Power, Link & Activity, Data send/receive |
Operating Temperature |
From -20 to +70°C |
| Storage Temperature |
From -40 to +85°C |
| Humidity |
From 0 to 90% non condensing |
Dimensions |
85×105×25mm |
| Weight |
0.3Kg |
Approvals |
FCC, CE |
|
ATC-2000WF
Wi-Fi to Serial Converter
Price list
Downloads
